New Products

V-Meter MK IV™

V-Meter MK IV

The most advanced System for Ultrasonic Pulse Velocity in Concrete, Wood, Ceramic and other Coarse grained and Construction Materials.  This test method rapidly  and easily allows the practitioner to locate cracks, voids, rot and other areas of inhomogenity in the material under test.  Complete System includes transducers, instrumentation unit, cables and software for PC.The system conforms to ASTM C - 597( USA ), EN12504-4 (Europe), BS 1881 Part 203 (UK) and other international standards.

Rebarscope™

Rebarscope in Use

Built for the professional this is  the most Advanced System for finding the location, depth, and size of steel reinforcement bar, post tension cables, copper and conduit in concrete brick, masonry or other non-metallic construction materials.  Cover Map™ feature ( a diagram of depths of the rebar ), electronic data storage, and Rebarlinx™ software for PC upload can also be included with the system!

James Bond Test™ MK III

James Bond Tester™ MK III

The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. It uses  disc attached to the material under test to,

  1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
  2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
  3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface

The James Bond Tester™ MK III  has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.

Chlorimeter™

Chlorimeter Field Test System to Determine the Chloride Ion Concentration in Wet Or Dry Concrete, and other construction materials.  This parameter is fundamental in corrosion analysis of existing structures.   It automatically shows a temperature compensated reading of percent of chlorides on its digital display. A wide chloride ranges - from 0.002 to 2% chloride by weight - is covered.  Results can be obtained in minutes!

Aquaprobe


Aquaprobe

The James Instruments Inc. AquaProbe utilizes the latest electronic technology to measure the quantity of water within in soils.Using the latest in micro-computer technology, it allow the user the direct readout of moisture content in real time.