Home > Strength Testing > Pull Test > Anchor Test System >

  Super Anchor Test
  Super Anchor Test
Super Heavy Duty Anchor Test
 
Questions?
Call us for more information!

    Heavy Duty: 0 to 7200 lbs.Force (0 to 30 kN)
    1000 lbs.(5.0 kN)gauge division
    Heavy Duty: 0 to 32,600 lbs.Force (0 to 145 kN)
    2000 lbs.(10 kN)gauge division

The load application is achieved via a ratchet handle driving a 4:1 hydraulic multiplier; the applied load is recorded directly on a gauge mounted on the tester body. This compact design is lighter and more convenient to use than that of separate hydraulic pump and ram arrangements.

An integral movement indication is provided allowing “First Movement” to be identified as well as total displacement before failure.




Item# Item Name   Qty Add
P-C-7290I Super Heavy Duty Anchor Test (Imperial)
- for Testing Anchors Over 3/4 Of An inch (20 Mm) in Diameter		 $8,218.00
P-C-7290M Super Heavy Duty Anchor Test (Metric)
- for Testing Anchors Over 20 Mm (3/4 in.) in Diameter		 $8,218.00
Check the items you wish to purchase, then click


Specifications::
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Strength Testing > Pull Test > Anchor Test System
Strength Testing > Pull Test
Strength Testing


Underwater Cable
24 Khz Ultrasonic Transducer Typically used for Mass Concrete, Large Wood Members and other Coarse Grained Construction Materials. each. $1,076.25
3Oz Jar of Conductive Gel $44.00
Cor-Map II Manual Printed Version: $25.00
Downloadable PDF file: FREE!
Bottom Gauge Plate (3 Probe Test) $384.04
Cementometer Manual Printed Version: $25.00
Downloadable PDF file: FREE!
Dust Sealing Ring $7.48
Bore Brush Handle $77.18
Cip Couplant Grease $59.85