You are here:Home > Ultrasonic Testing
Choose a sub category:
V-Meter MK IV™ Transducers Emodumeter™
Vu-Con®
These units use the latest ultrasonic technology to analyze concrete, wood, ceramic and other course grained materials for; cracks, voids, delaminations and honeycombing, freeze thaw analysis and Young's modulus, and plate thickness.
Sort By:
Page of 2
V-Meter MK IV™ Instrument and Transducers, Ultrasonic Pulse Velocity Vu-Con® System, with wave speed transducers and thickness transducers Emodumeter™ Resonant Frequency Test Equipment
The most advanced System for Ultrasonic Pulse Velocity in Concrete, Wood, Ceramic and other Coarse grained and Construction Materials.  This test method rapidly  and easily allows the practitioner to locate cracks, voids, rot and other areas of inhomogenity in the material under test.  Complete System includes transducers, instrumentation unit, cables and software for PC.The system conforms to ASTM C - 597( USA ), EN12504-4 (Europe), BS 1881 Part 203 (UK) and other international standards. A Unique system for measuring the thickness, determining quality, and locating areas of honeycombing, voids and delaminations in concrete. Complete System - Includes Instrumentation Unit, Velocity And Depth Transducers, Impactor Set, Charger And PC Software For Data Uploads.  Conforms to ASTM C-1383 and other International Standards Used For The Determination Of Resonant Frequency Of Materials such as Concrete, Rock, Ceramic, Carbon and More!  From the Resonant Frequency, Young's Modulus of Elasticity, and Poisson's Ratio can be Determined. Complete System - Includes Emodumeter Instrument, Accelerometer W/ Pick-Up Cable, Charger, USB Cable, Emodulinx Software And Standard Bench Assembly W/ Parts.  Conforms to ASTM C-215, and ASTM C-666 as well as other International Standards.
Veelinx Software showing waveform, control panel and data Emodulinx Software showing waveform, control panel and data 54 KHz Ultrasonic Transducer Dia 1.97" Length 3.2"
The Veelinx™ Software has been designed to help the engineer manage and interpret the huge amount of data available when utilizing the V-Meter MK IV™. The Veelinx™ software enables the user to upload data from the V-Meter device to a PC.  The Veelinx™ software also can be used to control the V-Meter remotely. The Emodulinx™ Software has been designed to help the engineer manage and interpret the huge amount of data available when utilizing the Emodumeter™. The Emodulinx™ software enables the user to upload data from the V-Meter device to a PC.  The Emodulinx™ software also can be used to control the Emodumeter™ remotely. 54 KHz, High Q Ultrasonic transducer  designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output.
24 Khz,Low Frequency Ultrasonic Transducer 180 Khz Shear Wave Transducer 150 Khz, Dia  0.9" Length 1.34"
24 KHz, High Q Ultrasonic transducer  designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output. 87 KHz Shear Wave Ultrasonic transducer is designed for rugged use on construction sites, similar outdoor environments as well as sample cores. Ultrasonic transducer is designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output.

500 Khz, Dia 6.0 Mm Underwater Transmitter Ultrasonic Calibration Bar
Calibration Bar
Price 1,515.00
Ultrasonic transducer is designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output.
Ultrasonic Calibration Bar to verify operation of Ultrasonic Pulse Velocity Test Systems.
Rubber Couplant (10 Pc 80Mm X 75 Mm Pack) Rubber Couplant (50 Pc - 25Mm Diameter) Cip Couplant Grease
For use with V-Meter, E-Meter and VuCon Transducers
Silicon Grease Underwater Receiver Pre-Amp For Tdxr W/Bnc
Silicon Grease
Price 151.00
Pre- Amp with BNC Connectors used with V-Meter Transducers for testing with long (over six meter) cable lengths
54 Khz, Exponential Receiver Each 54 Khz, Exponential Transmitter Each Standard Cable With Bnc Connector
For use on samples with less surface area than 50mm diameter circle required with the 54Khz standard transducers For use on samples with less surface area than 50mm diameter circle required with the 54Khz standard transducers Standart Cable With Bnc Connector for up to 200 feet
E-Meter MK II Instrument - Includes Charger Accelerometer W/ Pick-Up Cable For Emodumeter Depth Transducer
Depth Transducer
Price 1,837.00
Impactor Set Velocity Transducer Software
Impactor Set
Price 371.00
Velocity Transducer
Price 4,901.00
Software
Price 1,929.00
Underwater Cable VU-CON System Battery Charger Emodumeter™ Resonant Frequency Test Equipment
Available per foot or 50 feet w/ Connectors Used For The Determination Of Resonant Frequency Of Materials such as Concrete, Rock, Ceramic, Carbon and More!  From the Resonant Frequency, Young's Modulus of Elasticity, and Poisson's Ratio can be Determined. Complete System - Includes Emodumeter Instrument, Accelerometer W/ Pick-Up Cable, Charger, USB Cable, Emodulinx Software And Standard Bench Assembly W/ Parts.  Conforms to ASTM C-215, and ASTM C-666 as well as other International Standards.