Aquameter™ testing equipment for moisture content in concrete


	Phone 773.463.6565 \| Toll-Free 800.426.6500 \| Fax 773.463.0009	Español

HOME

ONLINE CATALOG

STRENGTH TESTING

REBAR LOCATORS

ULTRASONIC & STRUCTURALTESTING

CORROSION TESTING

FRESH CONCRETE

MOISTURE TESTING

ROLL HARDNESS TESTING

CERAMIC MATERIALS TESTING

Special Offer!

Now offering 25% off new Cementometer Orders.
This unit is a revolutionary w/c ratio meter to determine
the ratio of water
over cement on
fresh concrete.
Get in on this offer before it is too late, offer valid until
December 31, 2008.

The James T-M-170 Moisture Master » Specifications

The James T-M-170 Moisture Master

REQUEST FOR QUOTE

A Hand Held Instrument for Fast Accurate Measurement of Moisture Content in Solid Materials.

Specifications
Size:	165mm x 62mm x 26 cm (6.5 x 2.4 x 1 in)
Weight:	175 gr (6 oz)
Measuring Range:	0 – 80.0%
Resolution	“0.1%
Temperature Range:	0° to 50° C
Battery:	4 x ‘AAA’

Aquameter™

Specifications

Features & Benefits:

	Direct read out of moisture content, no charts or tables required.
	Separate modes for concrete, brick, different woods, and gypsum.
	Measures moisture in most solid materials.
	Color coded LED indicates moisture condition of material
	Alarm values can be set by user.
	Pin mode for low density materials, capacitive mode for high density materials.

Typical Applications:

	Locate leaking pipes in walls and floors.
	Locate seeping water in basements & masonry tanks.
	Check moisture level of material before applying coatings or adhesives.
	Curing condition of wood, stucco, and other construction materials.

Downloadable Files:

Complete Data Sheets