HR Meter™ reinforcement locator specifications non destructive


	Phone 773.463.6565 \| Toll-Free 800.426.6500 \| Fax 773.463.0009	Español

HOME

ONLINE CATALOG

STRENGTH TESTING

REBAR LOCATORS

ULTRASONIC & STRUCTURALTESTING

CORROSION TESTING

FRESH CONCRETE

MOISTURE TESTING

ROLL HARDNESS TESTING

CERAMIC MATERIALS TESTING

Special Offer!

Now offering 25% off new Cementometer Orders.
This unit is a revolutionary w/c ratio meter to determine
the ratio of water
over cement on
fresh concrete.
Get in on this offer before it is too late, offer valid until
December 31, 2008.

HR-7000 Rebar Locator (Covermeter, Rebar Finder, Rebar Detector) » Specifications

HR-7000 Rebar Locator
(Covermeter, Rebar Finder,
Rebar Detector)

REQUEST FOR QUOTE

Rugged field instrument for locating,sizing, and depth of rebar in concrete structures and masnonary units.

Sales Numbers
R-HR-7000:	US Scale Hand-held unit with charger in carrying case
R-HR-7500:	Metric Scale
R-HR-7200:	US Scale Telescopic post mounted Rebar
R-HR-7700:	Metric Scale Locator with charger
R-C-4995	Universal battery charger
R-080-10453	Battery

Specifications
Operating temperature range:	-5°C to 45° (23°F to 113°F)
Bar Size Calibration:	3/8” to 1-3/8” (10 to 36 mm)
Max. Detection Range:	10” (No. 11 Bar) 250 mm (36 mm Bar)
Power Source:	Rechargeable Storage Battery
Battery Life:	8 hours continuous operation

HR-7000 and HR-7500 only:
Operating Weight:	Less than 3.5 pounds (1.60 kg)
Operating Dimensions:	10” x 6” x 4” (19 x 18 x 10 cm)
Weight incl. carrying case:	6 pounds (2.70 kg)
Dimensions of carrying case:	7.5” x 7” x 14” (19 x 18 x 36 cm)

HR-7200 and HR-7700 only:
Operating Weight:	5 pounds (2.26 kg)
Operating Dimensions:	10” x 6” x 35” (19 x 18 x 88.9 cm

HR-7000 Rebar Locator

Detection and Orientation of Rebars

Measurement of Concrete Cover

Location of Ferrous Metals

Location of Prestressed Cables

Specifications

Instructions

Features & Benefits:

	Single unit construction; no physical strain for the operator and no probe cord to snag or break.
	Post-mounted sensor with meter mounted separately for convenient viewing by operator in stand-up position.
	Pin-point accuracy for precise rebar location from direct reading, stable analog meter.
	Detection up to 10 inches (250 mm) of cover with easy to read calibrated meter.
	Light operating weight - less than 3.5 pounds (1.6 kg.).
	Up to 8 hours continuous use between battery charges; improved electronic circuitry.
	Conforms to BS-1881-207 and other international standards.

Downloadable Files:

	Complete Data Sheets
	Instructions