| |
The James Rebar Datascan is a sophisticated reinforcement bar locator with an easy to read liquid crystal display.
| Specifications |
| Dimensions: |
Height – 2 3/4 inches (7 cm.)
Depth – 6 inches (15 cm.)
Width – 5 1/2 inches (14 cm.) |
| Operating weight: |
3 – pounds (1.36 kgs.) |
Total weight in
carrying case: |
10 pounds (4.5 kgs.) |
| Display: |
2 X 16 characters, high visibility .22” highliquid crystal dot
matrix. The LCD also displays battery voltage. |
| Power Source: |
Internal rechargeable batteries with
external battery charger. |
| Battery Life: |
Approximately 8 hours for a 16 hour
recharge period. |
Normal calibrated
Bar sizes: |
Numbers 3, 5, 7, 9, 11, and
metric sizes 40, 32, 25, 16, and 10. |
| Tendon Sizes: |
5/16 (8 mm.), 3/8 (10 mm.),
7/16 (11 mm.), 1/2 (12 mm.),
9/16 (14 mm.) |
Operating
Temperature: |
32° - 104°F (0° - 40°C) |
Charging
Temperature: |
18° - 104°F (10° - 40°C) |
| Audible Output: |
Tone change detectable for a 3?4 inch
bar (20 mm.) at 12 inches
(300 mm.) depth. |
| Measurement Range Accuracy Under Ideal Conditions: |
+ 2% up to depth of 6 inches
(150 mm.) + 5% above 6 inches
(150 mm.) |
| Bar size accuracy: |
+ 10% to an 8 inch (200 mm.) |
|
| Rebar Datascan |
| Specifications |
| Instructions |
Features & Benefits:
 |
Reinforcement bar cover
can be detected to a
maximum depth of 12
inches (300mm) by reading
directly from the high
legibility liquid crystal
display. |
|
Analog meter on probe
facilitates rapid and easy
location of rebars. |
|
Fast scanning of large
areas is enhanced by an
audible output via head
phones. |
|
Optional memory stores
over 1000 cover readings
for later downloading to a
personal computer. |
|
Calibration for rebars and
high tensile steel tendons is
available in both U.S. and
metric sizes. |
|
The probe meter can be
preset to react to any rebar
within that value, ignoring
those outside the range. |
|
Conforms to BS-1881-204. |
|
Downloadable Files:
|
|
