| |
The
James Data Scan™ Rebar Locator is a digital reinforcement
bar locator, rebar finder that is able to locate rebar and also determine
rebar size. This rebar detector comes with an easy to read liquid
crystal display. The instrument is also capable of locating rebar
mesh, rebar depth, and concrete cover.
This cover meter has an optional memory chip.
| Specifications |
| Dimensions: |
Height – 2 3/4 inches (7 cm.)
Depth – 6 inches (15 cm.)
Width – 5 1/2 inches (14 cm.) |
| Operating weight: |
3 – pounds (1.36 kgs.) |
Total weight in
carrying case: |
10 pounds (4.5 kgs.) |
| Display: |
2 X 16 characters, high visibility .22” highliquid crystal dot
matrix. The LCD also displays battery voltage. |
| Power Source: |
Internal rechargeable batteries with
external battery charger. |
| Battery Life: |
Approximately 8 hours for a 16 hour
recharge period. |
Normal calibrated
Bar sizes: |
Numbers 3, 5, 7, 9, 11, and
metric sizes 40, 32, 25, 16, and 10. |
| Tendon Sizes: |
5/16 (8 mm.), 3/8 (10 mm.),
7/16 (11 mm.), 1/2 (12 mm.),
9/16 (14 mm.) |
Operating
Temperature: |
32° - 104°F (0° - 40°C) |
Charging
Temperature: |
18° - 104°F (10° - 40°C) |
| Audible Output: |
Tone change detectable for a 3?4 inch
bar (20 mm.) at 12 inches
(300 mm.) depth. |
| Measurement Range Accuracy Under Ideal Conditions: |
+ 2% up to depth of 6 inches
(150 mm.) + 5% above 6 inches
(150 mm.) |
| Bar size accuracy: |
+ 10% to an 8 inch (200 mm.) |
|
| Rebar
Datascan |
| Specifications |
| Instructions |
Features & Benefits:
 |
Reinforcement
bar cover can be detected to a maximum depth of 12 inches
(300mm) by reading directly from the high legibility liquid
crystal display. |
|
Analog
meter on probe facilitates rapid and easy location of
rebars. |
|
Fast
scanning of large areas is enhanced by an audible output
via head phones. |
|
Optional
memory stores over 1000 cover readings for later downloading
to a personal computer. |
|
Calibration
for rebars and high tensile steel tendons is available
in both U.S. and metric sizes. |
|
The
probe meter can be preset to react to any rebar within
that value, ignoring those outside the range. |
|
Conforms
to BS-1881-204. |
|
Downloadable Files:
|
|
