| |
Measures bonding strength between two layers of material.
Method
- Using a coring bit for either 3 inch or 2 inch cores, make a notch or kerf in the material to be tested, drilling through the bond interface.This exactly defines the area to be tested.
- Using a standard quick epoxy adhesive (not supplied with the
kit) attach a steel disc on the defined test area.
- Set the bond test alignment plate over the defined test area and level the plate by adjusting the legs.
- Attach the Puller and turn the hand operated ratchet wrench until failure occurs.
- The steel discs can be reused and cleaned using a suitable solvent.
|
| 007 James Bond Tester™ |
Technical |
| Method |
| Equipment |
| Specifications |
| F.A.Q. |
Features & Benefits:
 |
Accurate
bond strength of repair mortars, epoxy resin, laminates,
overlays, and other coatings. |
|
Calibrated
gauge with maximum load indicator. |
|
Viscose
damping mechanism to protect against sudden load release. |
|
Adjustable
alignment plate with built in leveling facility. |
|
Compact
design. |
|
Easy
to use. |
|
Conforms
to BS-1881-207, ASTM: C-4541 and ACI:503-30. |
|
Downloadable Files:
|
|
