Phone 773.463.6565 | Toll-Free 800.426.6500 | Fax 773.463.0009
Spanish VersionEspaņol
   HOME
   ONLINE CATALOG
      » STRENGTH TESTING
      » REBAR LOCATORS
      » ULTRASONIC & STRUCTURALTESTING
      » CORROSION TESTING
      » FRESH CONCRETE
      » MOISTURE TESTING
      » ROLL HARDNESS TESTING
      » CERAMIC MATERIALS TESTING
   US RENTAL
   TERMS & CONDITIONS
   REPAIR POLICY
   WARRANTY STATEMENTS
   REQUEST FOR QUOTE
   CONTACT US
Special Offer!

Now offering 25% off new Cementometer Orders.
This unit is a revolutionary w/c ratio meter to determine 
the ratio of water
over cement on
fresh concrete. 
Get in on this offer before it is too late, offer valid until
December 31, 2008.


  V-Meter™ » Specifications
V-Meter™ REQUEST FOR QUOTE
  The most advanced ultra-sonic test system for accurately identifying basic characteristics of coarse grained materials.

Model Numbers
V-C-7902 V-Meter™ MARK II, basic instrument, CRO attachment, 12 foot cables and application manual (less transducers).
V-C-7901 V-Meter™ MARK II, system for general use, including: C-7902 basic V-Meter™ Mark II, and two (2) C-4898 54 KHz transducers.
V-C-4860 Hand Held Terminal
V-C-4940 Re-amplifier.

Specifications
Frequency range: 24-500 KHz, based on transducers selected.
Receiver sensitivity: 250 micro volts, between 30 KHz and 100 KHz.
Receiver input impedence: approximately 2 M OHMS.
Transit time measurement: 0.1 to 6400 microseconds, direct digital display.
Measurement accuracy: + 0.1 microseconds.
Transmitter output: pulse 1000/500V, 2 microseconds.
Transmitter pulse rep rate: selectable 1,3 or 10.
Power supply: Internal rechargeable NI-CAD batteries, 9 hours portable operation.
Line input: 115/230 volts 50/60 Hz.
Weight: 2.7 KG (6 lbs.) with battery.
Dimensions: 190 x 100 x 220MM (7.5” x 4”x 8”).
Ambient temperature range: 0-40 degrees C.
Cathode ray oscilloscope output: permits external display of received signal for analysis.
Display: 240 x 64 LCD, graphic dot matrix.
Storage capacity: 1 K byte.
Data transfer: RS 232 C. Built in software uploads to IBM PC
V-Meter™

Applications
Technical
Specifications
FAQs

Features & Benefits:
Direct digital read-out of transit time.
Flaw detection.
Simple calibration; no special bar required.
Built-in wave form display on LCD.
Portable, light weight with battery and A-C power.
Conforms to ASTM C- 597, BS 1881-203 and other international standards.

Optional Hand Held
Terminal:
RS-232 output for uploading to computer.
Direct reading of calculated P-wave velocity and S-wave velocity.
Direct reading of calculated modulus of elasticity.
Direct reading of Poissons ratio.

Downloadable Files:
Complete Data Sheets
V-Meter™ Instruction Manual
 

Home | Online Catalog | US Rental | Terms & Conditions | Contact Us | Site Map
Press Releases | Events | Student Scholarship Award | Software Downloads | Technical Papers & Abstracts
Phone 773.463.6565 | Toll-Free 800.426.6500 | Fax 773.463.0009
© Copyright 2008 James Instruments Inc. All Rights Reserved.