Home > Corrosion Testing >

Cor-Map II ®
Advanced Half Cell Potential System for Locating
Areas of Rebar Corrosion
with Digital Mapping Feature

Cor-Map II®<br>Used for Corrosion Potential Data Acquisition And Analysis. Complete System Cu/Cuso4
Cor-Map II


 
Alternative Views:


Questions?

Contact us for more information!


Get a Quote!!
For orders outside the United States and Canada please contact us and we will be happy to get you a complete quote.

If you are not sure on what item to buy, please see our Purchasing Notes below or contact us and we'll be glad to assist you on your order.

We also offer an "Add extended warranty" option to your purchased instrument! Just add it to your cart
.

Instruction manuals for this equipment can be found here:

Cor-Map II Instruction Manual


Item# Item Name Price Qty Add
C-CM-5000-CU-EXT Cor-Map II ®
Extended Warranty
Advanced Half Cell Potential System for Locating
Areas of Rebar Corrosion
with Digital Mapping Feature
$1,128.70
C-CM-5000-CU Cor-Map II ®
Advanced Half Cell Potential System for Locating
Areas of Rebar Corrosion
with Digital Mapping Feature
$6,052.00
Check the items you wish to purchase, then click


Product Description:



CorMap II®

Advanced System for corrosion potential data acquisition and analysis, allowing the user to quickly identify areas of probable corrosion in the field.


Purchasing Notes

  • Purchase this with the R-C-3000 Rebarscope® for structural analysis.


Applications

  • Locate corroding steel reinforcement

  • Repair cost estimation


Features & Benefits

  • Ruggedized Electronics allows rapid analysis of data in the field or office.

  • Conforms to ASTM C--876 Standard Method of Half-Cell Potential of uncoated reinforcing steel in concrete.

  • Electrode is designed for use on horizontal, vertical and inverted positions.

  • Temperature and humidity sensors facilitate inclusion of environmental conditions in data analysis.

Advanced System for corrosion potential data acquisition and analysis, allowing the user to quickly identify areas of probable corrosion in the field.


Product Information

Theory:

For steel reinforcing bars in concrete, corrosion is an exchange of ions from the steel to the concrete. This chemical exchange of ions produces rust (FeO2). It also produces areas of concrete where there is a larger concentration of negative ions due to the corrosion process of the steel reinforcing bar than areas where there is no corrosion. This larger concentration of ions creates a small electric voltage potential. By measuring and mapping the voltage potential found in the concrete we are able to determine rapidly the presence of corroded steel reinforcement without costly and time consuming demolition of the concrete.

This is done by recording the voltage between the rebar and a half cell, which is mapped across the surface of the concrete. Areas of rust with high corrosion will exhibit significantly lower voltages than areas without corrosion, thus areas of corroding steel reinforcing bar in concrete can be rapidly found. There is no need to know the exact position of the steel reinforcing bar or the amount of cover, the presence of the steel is all that is required. However, the voltmeter has to be connected to an exposed piece of the rebar network, and because the concrete is being tested, any material on the surface should be removed.

Half Cell Reference Electrode :

The Cor-Map II® system comes complete with a rugged half-cell designed for the tough construction environment. Porous ceramic tips are used in order to provide a long life, and eliminate problems from clogs in the Cu/CuSO4 half-cell. The se specially shaped tip s have been designed to allow the half cell to take read ings in the vertical, horizontal or inverted position . There is also a semi transparent full- view window, allowing liquid level observation without removal of the sealed ends; while still protect ing the half cell from damage by sunlight.

Instrumentation Unit:

The fully integrated data acquisition and analysis unit has been designed for the rapid analysis of data in the field or office. As large amounts of data are normally generated, interpretation of this information can be very difficult. Employing the simple to use menu driven CorMap® main unit, data can not only be collected quickly and easily, but it can also be analyzed directly in the field on the graphic display. The unit produces a symbolic map of the structure, where symbols represent various half-cell potential voltage levels previously acquired. This symbolic map can then be interpreted like a contour map where areas of high potential represent areas most likely to be corroding.

Not only can this information be acquired and analyzed but the unit will also read the general environmental parameters of temperature and relative humidity.

All this data can also be stored and uploaded to a P.C. This allows the user to include the data in subsequent reports and spreadsheets for further analysis. Each data point is also recorded with the time and date to simplify later analysis.


Specifications

Instrument Weight:
6 lbs. ( 2.75 Kg )
Ship Weight:
15 lbs. ( 6.8 Kg )
Instrument Dimensions:
4.5 in. x 8.5 in. x 10.5 in. (115mm x 225mm x 267 mm )
Battery:
12 Volt 4 - 10 Hours Continuous Operation
Display:
320 x 240 pixels backlit for daylight use
Storage:
Over 5000 readings
Operating Temperature:
0 - 50 C
Temperature Reading Range:
-273 - +130 C
Temperature Accuracy:
+/- 0.5%
Humidity Reading Range:
0 - 100%
Humidity Accuracy:
+/- 5%




Downloadable Document


Downloadable Software


Downloadable Instruction Manual



Standards





Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Corrosion Testing
Corrosion Testing > Cor-Map® II