James Mini R-Meterô
A rugged hand
held field instrument for finding the location, depth and size
of reinforcement rebar,
post tension, copper and
in conjunction with the C-CM-4000 Cormap
economical corrosion analysis
Rebar Locating Detection and Orientation
of Concrete Cover
Concrete Drilling and Sawing
Repair and Rehabilitation
Location of Prestressed Cables
design for greater accuracy.
for all depth ranges.
Locates up to
- Store Data for
Later Upload via USB
Mini R-Meterô is a
hand-held field instrument for finding
the location and depth of reinforcement bars in place.
weight and inexpensive, and an
easy to use
unit to locate rebar.
Rebar detection of up to 10"Ě (250mm) can be accomplished when locating
large diameter rebar. An easy to read display and a 4 hr battery life are just a few advantages that make the Mini R-Meter one of the most advanced hand
held units in the field today. The sensor design allows the end user to
locate and determine concrete cover in corners or hard to reach areas.
The system allows the user to select between Imperial and Metric units,
and the data can be saved in the instrument for posterior uploading to
a computer. The data is saved in the system with the date and time of
the record to help identify
taken. The Mini R-Meter rebar locator is also capable
of locating non-ferrous
eddy current sensor was specifically designed to react with the
presence of currents on the outer surface of metal objects. It is
uninfluenced by small metal particles in the
concrete, whether the concrete is
fresh or hardened,
wet, or dry. The eddy
also allows the unit to locate both ferrous as well as non-ferrous
metals in concrete; thereby finding not only steel reinforcing bars accurately, but also tendons,
copper tubing, conduit, and more.
latest in microprocessor technology not only conditions the signal from
for more accurate and dependable results,
but also provides the user with the
information they need.
in memory can store over 150 individual data points for later
Detection and Orientation of Rebar
The exact position and orientation
of rebar can be measured quickly and
Rebar-free areas can be identified for coring, grinding, resurfacing, or
insertion of new machinery mountings.
The instrument can be used to inspect new structures for compliance with
specifications as well as old structures under modification.
The exact position and
orientation of rebar can be measured quickly and
accurately. Knowing the size of the rebar, concrete cover can be
detected and the distance between the concrete and the surface it will
appear in the easy to read display.
Locate any metals, as pipe,
flues, wire, and sheets embedded in
concrete, masonry, or wood.
Identification is possible to a depth of 10 inches.
Location of Pre-Stressed Cables
Locates the position of cables and
lost tendon splices in pre or post tension concrete products.
Operating temperature range:
-5 C to 45 C (23 deg
F to 113 F)
Calibration: 3/8" to 1-3/8"
Bar) 250 mm (36 mm Bar)
Power Source: 2 AA
4 hours continuous operation
Software: Windows Compatible/ USB Required
HR-8000 and HR-8100 only:
Less than 3.5 pounds (1.60 Kg)