You are here:Home > Strength Testing > Pull Test
Choose a sub category:
Anchor Test System

Pull Test

Sort By:
Page of 1
James Bond Test™ for Testing Tensile Strength Of Overlays James Bond Test™ for Testing Tensile Strength Of Overlays Standard Anchor Test
Measures the Bonding Strength between two layers of existing materials. Determine the adhesion strength of shotcrete, epoxies, paint, asphalt and other repair materials or coatings. Includes 10 - 2" Discs. Extended Warunty for the Bond Test System Determine the adhesion strength of shotcrete, epoxies, paint, asphalt and other repair materials or coatings. Standard Anchor Test System measures the pull strenght of anchors in concrete, wood, masonry, brick and other construction materials.
Super Anchor Test 50mm ( 2") steel disk for the 007 James Bond 75mm ( 3") steel disk for the 007 James Bond system
Super Anchor Test System for testing anchor strengths in concrete, wood, masonry, and other construction materials  up to 145 KN (or 32,600 lbF). 50 mm ( 2") steel disk for the  007 James Bond system for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. ASTM Standard Discs Size. 75mm ( 3") steel disk for the  007 James Bond system for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings.
50mm ( 2") Aluminium disk for the 007 James Bond System for testing of bond strength of two layer materials. 9kN Gauge for the James Bond Test™ MK IV and Standard Anchor Test for Tensile Strength Of Anchors 25KN Gauge for the James Bond Test™ MK IV and Standard Anchor Test for Tensile Strength Of Anchors
50 mm ( 2") Aluminum disk for the  007 James Bond system for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. ASTM Standard Discs Size. 9kN gauge for the James Bond Test™ MK IV for testing of bond strength of two layer materials, and Standard Anchor Test 25KN gauge for the James Bond Test™ MK IV for testing of bond strength of two layer materials, and Standard Anchor Test
Oil Refill Bottle for the 007 James Bond system Devcon 5 Min 2 Ton Epoxy for Bond Test Alignment plate for the James Bond Tester™ MK IV
Oil Refill Bottle for the  007 James Bond system for testing of bond strength of two layer materials, adhesion testing, overlay testing, testing of laminates, bond test of mortar repair. BS-1881, ASTM D-4541, ASTM C-1583. Devcon 2 Ton Epoxy for Bond Test Alignment plate for the  James Bond Tester™ MK IV for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. Includes built in horizontal and vertical level.
M12 Ring Bolt Adapter Clevis Bolt Fixing Adapter Kit Metric Heavy Duty Adapters
Metric Threaded Stud Adapter Kit Imperial Threaded Stud Adapter Kit Metric Threaded Button Adapter Kit
Metric Threaded Stud Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm 		Imperial Threaded Stud Adapter Kit measurements are
1/4, 5/16, 3/8, 7/16, and 1/2 UNC 		Metric Threaded Button Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm
Metric Slotted Button Adapter Kit Imperial Threaded Button Adapter Kit Imperial Heavy Duty Adapters
Metric Slotted Button Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm 		Imperial Threaded Button Adapter Kit measurements are
1/4, 5/16, 3/8, 7/16, and 1/2 UNC
Imperial Slotted Button Adapter Kit Anchor Test System Extended Warranty Standard Anchor Test System Manual PDF
Standard Anchor Test System Instruction Manual
Printed Version: $25.00
Downloadable PDF file: FREE!
Imperial Slotted Button Adapter Kit measurements are
1/4, 5/16, 3/8, 7/16, and 1/2 UNC