Home > Ultrasonic Testing >

180 KHz Shear Wave Transducer

180 KHz Shear Wave Transducer
180 KHz Shear Wave Transducer

Call us for more information!
Price $4,271.00

Product Code: V-C-7283

Product Information
Ultrasonic transducer is designed for rugged use on construction sites and similar outdoor environments.This transducer is built to both send and receive ultrasonic waves and convert them to a voltage output.

Shear Wave Transducer Mechanical Drawing
  • Two Shear Wave Transducers units are required for proper operation
  • Line the flat face of each transducer so that the internal polarized crystals are in alignment
  • Material to be tested should have a surface area larger than the diameter of the transducer, ie. at least 50mm wide
  • These Transducers should be used on the same surface on material to be tested, ie. in indirect mode

Used to test coarse grained materials such as concrete pours, rock, other large structural objects as well as core samples.

180 kHz Shear Wave Transducer

-Finding non-homogeneous conditions of a surface
-used for concrete, wood, rock (small samples only)

417g/ 0.92lbs
Case Dimensions Diameter- 50mm x Length 60mm (1.97" x 2.33")
Housing Stainless Steel Ruggedized
Element Piezo electric ceramic
Frequency 180 kHz Center
Operating Temperature -10 to 40 C
Excitation Typically HV 1000volts @ 5uS LV 600volts @ 5uS
Other FeaturesSide Connectors to Facilitate Applying Pressure to Transducer Face in the Field

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Ultrasonic Testing
Ultrasonic Testing > Transducers