World of Concrete 2020 concluded its 45th edition with a very strong event for the concrete & masonry industries.
This signature annual event drew approximately 54,000 registered professionals, packing the halls of the Las Vegas Convention Center, and featured 1,310 companies
(including 255 brand new companies) exhibiting across more than 700,000 net square feet of exhibit space. International presence was also robust with 237 companies from 29 countries outside the United States.
Exhibit space booked onsite for WOC 2021 resulted in just over 530,000 net square feet, nearly 77% of the WOC 2020 show floor, consisting of 485 companies, projecting next year’s edition
to be one of the largest events in over a decade.
This show represents a significant chance for our customers
to try the equipment and to provide us with feedback on what they are looking
for. On display were;
Windsor Probe Test System: A Non Destructive Test System for
Concrete Compressive Strength in the field. Safe, Quick, and Simple to use it
is the most effective method of Concrete Compressive Strength Testing on Site.
The System performs equally well on standard and high performance concrete.
Conforms to ASTM C-805 and other International Standards.
Windsor Pin Test System: A unique instrument for measuring
the strength of new or existing concrete, mortar and other construction
materials in the field utilizing the established principle of resistance to
penetration. A unique chuck allows testing of mortar joints compressive
strength in the field. Conforms to ASTM C-803.
James Bond Test System Measures the Bonding Strength between
two layers of existing materials, determine the adhesion strength of shotcrete,
epoxies, paint and other repair materials or coatings. Includes 10 - 2"
Discs & 10 - 3" Discs for testing.
Rebarscope Built for the professional this is the most
Advanced System for finding the location, depth, and size of reinforcement bar,
post tension cables, copper and conduit w/ Cover mapping feature, Storage, and
upload to PC!
Mini R-Meter Ruggedized for tough field use, this economical
hand held unit is used for finding the location, estimates either depth, or
size of reinforced rebar, post tension cables, copper and conduit!
V-Meter MK IV: The most advanced System for Ultrasonic
Pulse Velocity in Concrete, Wood, Ceramic and other Coarse grained and
Construction Materials. This test method rapidly and easily allows you to
locate cracks, voids, rot and other areas of inhomogeneity in the material
under test. Complete System includes transducers, instrumentation unit, cables
and software for PC, Conforms to ASTM C - 597 and other standards.
Aggrameter Microwave Moisture Meter Used for the Rapid
Determination of Moisture Content in Sand and Other Fine or Coarse Aggregates.
It is fast and easy to use as well as completely portable.
James Instruments specializes in Non-Destructive testing
equipment for concrete and other construction materials. Central to the
improvement of the concrete infrastructure are tools that evaluate the
condition of existing construction. Destructive and non-destructive testing
(NDT) techniques are applied. Destructive tests can provide direct information,
but are relatively expensive, time-consuming and cause damage to the structure.
Destructive test results often cannot be evaluated using statistical approaches
because the number of locations in the structure that can be tested without
damage to the structure is limited. On the other hand, NDT techniques are
relatively inexpensive to apply, and they can detect, localize, and
characterize flaws and damage in concrete structures without leaving any
undesirable discontinuities or causing damage to concrete members.
James Instruments Inc. is the leading manufacturer of
non-destructive test equipment for construction materials, specifically
concrete, ceramic, wood and other coarse grained materials. We supply the
instruments that measure and analyze strength, structure, corrosion and
moisture in concrete and other construction materials. And more. James
Instruments -- rugged, quality equipment for field use -- backed by factory
service and an ongoing program of research and development.
If you came to see us but noticed we were busy, please contact us at
email@example.com and we will gladly assist you with any
unanswered questions. We hope you have a great year ahead, and we look forward
to seeing you again at WOC 2020, on January 18th to the 22nd.