Home > Strength Testing > Rebound Hammers > Digital Rebound Hammers >

Low Impact Digital Rebound Hammer
For Concrete Compressive Strength Analysis in the Field
and Material Hardness Testing.

Digital Test Hammer
Digital Test Hammer


 
Alternative Views:


Questions?

Contact us for more information!


Get a Quote!!

For orders outside the United States and Canada please contact us and we will be happy to get you a complete quote.
If you are not sure on what item to buy, please see our Purchasing Notes below or contact us and we'll be glad to assist you on your order.

We also offer an "Add extended warranty" option to your purchased instrument! Just add it to your cart.

Instruction manuals for this equipment can be found here:
Instruction Manual Low Impact Digital Rebound Hammer



Item# Item Name   Qty Add
W-D-1505-ext Extended Warranty for Low Impact Digital 1505 Rebound Hammer
$505.00
W-D-2005 Low Impact Digital Rebound Hammer Complete System
(Digital Rebound Hammer 1500 With Printer And Software)
$2,967.00
W-D-2005-ext Extended Warranty Digital 2005 Rebound Hammer
$723.00
W-D-1505 Low Impact Digital Rebound Hammer Basic System(Digital Rebound Hammer 1500, without Printer or Software)
$2,493.00
Check the items you wish to purchase, then click


Product Description:


James Digital Test Hammers

Digital hammers for the quick and easy determination of the strength of concrete.

Digital Test Hammer with Printer


Purchasing Notes


Product Information

James Instruments™ digital test hammers are an advanced, completely automated system for estimating concrete compressive strength. Its calculation, memory and recording functions allow for quick, easy and accurate test results. The unit is also used on rock cores, it's low impact energy not damaging brittle specimens. This easy-to-use instrument provides a quick and simple test for obtaining an immediate indication of concrete strength in various parts of a structure. The minimum verifiable strength is 1400 PSI (10 MPa) to approximately 9000 PSI (62 MPa). All concrete test hammers measure the surface hardness of the material they are testing; this is then correlated to concrete compressive strength.

Discard values for multiple test results can be set; the mean, median and compressive strength can also be calculated. The addition of modern microprocessor technology allows the data to be stored, printed and transferred to a personal computer for further analysis, or inclusion in your reports.

The Low Impact Test Hammer has a number of specialized applications. It is typically used for thin concrete specimens (between 50mm (2") and 100mm (4") thick) such as sidewalks, bridgedecks and some driveways. The unit can be used on plaster and morar as well to verify consistancy. The Test Hammer is also used on brittle rock cores where a larger impact will damage the specimen. These units are commonly used to classify rock cores and brittle rock specimens. Finally, it is also suitable for paper and film rolls where the larger impact energy of a standard hammer will damage the surface of the material being tested.

Paper and Film testing are a significant application for the Low Impact Manual Test hammer. Typically eight to ten readings are taken across the surface of the paper or film roll to determine if the edges are as tightly wound as the center, and that winding has been even through out. TAPPI specifies readings 25mm-75mm ( 1"-3" ) from the edge and 150mm ( 6" ) down the length of the roll. Rolls too loosely wound, or to soft will go out of round during shipment and storage. This will cause unwind speeds to be slowed thereby lowering productivity. Rolls that are wound too tightly or hard can burst or tear during transport, and storage.

The unit comes with an integrated alpha “ numeric digital display, and control panel. You can switch between standard or metric units.

The field printer mounts on the belt for ease of use. Connection to a personal computer is via the USB interface.

Digital Model W-D-2005
Automatic calculation of mean rebound number, compressive strength and more; Field Printer, PC connection and software for downloading

Digital Model W-D-1505
Automatic calculation of mean rebound number, compressive strength and more; Application: Rapid estimate of concrete strength.



Standards


Features & Benefits

  • Digital Model W-D-2005:

    • Automatic calculation of mean rebound number, compressive strength and more; Field Printer, PC connection and software for downloading .

  • Manual Model W-D-1505:

    • Automatic calculation of mean rebound number, compressive strength and more .

  • All James Test Hammers conform to:

ASTM C-805
USA
BS-1881-202
Grt. Brit.
ISO/DIS 8045
Intl.
EN 12 504-2
Europe
ENV 206
Europe
NFP 18-417
France
B 15-225
Belgium
JGJ/T 23-2001
China
JJG 817-1993
China











Specifications
Display:
2x16 Trans “ reflective
Construction:
All Aluminum for rugged construction environment
Operating Temperature:
0° to 50° C (32° to 122° F)
Batteries:
2 ˜AA™
Ap. Size:
100mm x 100mm x 270mm ( 4 x 4 x 10 )
Ap. Weight:
1.6 Kg ( 3.5 lbs.)
Printer Size:
64mm x 49mm x 31mm ( 2.5 x 1.9 x 1.2 )
Weight:
up to 0.270 kg ( 0.6 lbs ) with paper
Battery:
Internal Lithium ion with 1 yr. approximate life
Charger:
100VAC “ 240VAC 5 VDC 3.0A
Operating Temperature:
0° to 50° C (32° to 122° F)
Software
Windows PC Compatible / USB interface required
Impact Energy
0.735 Nm






Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Strength Testing > Rebound Hammers > Digital Rebound Hammers
Strength Testing
Strength Testing > Rebound Hammers