James Instruments Inc. WOC 2011 Press Release

James Instruments Logo

James Instruments Inc.

3727 N. Kedzie Avenue Chicago, IL 60628-4545, USA

1-800-426-6500 +1.773.463.6565 | +1.773.463.0009

[email protected] | http://www.NDTJames.com

James Instruments Inc. - Europe

Windmolen 22, 7609 NN Almelo, The Netherlands

Phone: +31 (0)548 659032 | Fax: +31 (0)548 659010

[email protected] | http://www.NDTJames.eu

James Instruments Inc. attends 2011 World of Concrete/World of Masonry.

James Instruments Inc. exhibits at the leading international commercial construction trade show for the concrete and masonry industry, from January 18th to 21st, 2011.

James Instruments Booth World Of Concrete 2011

James Instruments Inc. Booth at World of Concrete 2011

Chicago, IL, USA January 30th , 2011, James Instruments Inc. manufacturer of the world's most advanced Non Destructive Test Equipment for construction materials exhibited at the World of Concrete January 18th to the 21st, 2011. This is the twenty sixth year the company has exhibited at the World of Concrete. The company has found the show an exciting place to meet with customers, present the latest technology and learn about the latest developments in the industry.

James Instruments World of Concrete Booth with Products

James Instruments Inc. Booth at World of Concrete 2011 Showing Equipment to be Demonstrated

This show represents a significant chance for our customers to try the equipment and to provide us with feed back on what they are looking for. On display were;

Windsor Probe™ Test System: A Non Destructive Test System for Concrete Compressive Strength in the field. Safe, Quick, and Simple to use it is the most effective method of Concrete Compressive Strength Testing on Site. The System performs equally well on standard and high performance concrete. Conforms to ASTM C-805 and other International Standards.

Windsor Pin™ Test System: A unique instrument for measuring the strength of new or existing concrete, mortar and other construction materials in the field utilizing the established principle of resistance to penetration. A unique chuck allows testing of mortar joints compressive strength in the field. Conforms to ASTM C-803.

James Bond Test System™:Measures the Bonding Strength between two layers of existing materials, determine the adhesion strength of shotcrete, epoxies, paint and other repair materials or coatings. Includes 10 - 2" Discs & 10 - 3" Discs for testing

R-Meter™ MK III: Built for the professional this is the most Advanced System for finding the location, depth, and size of reinforcement bar, post tension cables, copper and conduit w/ Cover mapping feature, Storage, and upload to PC!

Mini R-Meter™: Ruggedized for tough field use, this economical hand held unit is used for finding the location, estimates either depth, or size of reinforced rebar, post tension cables, copper and conduit!

Vu Conn™:A Unique system for measuring the thickness, determining quality, and locating areas of honeycombing, voids and delaminations in concrete. Complete System - Includes Instrumentation Unit, Velocity And Depth Transducers, Impactor Set, Charger And PC Software For Data Uploads. Conforms to ASTM C-1383 and other International Standards

V-Meter™ MK III:The most advanced System for Ultrasonic Pulse Velocity in Concrete, Wood, Ceramic and other Coarse grained and Construction Materials. This test method rapidly and easily allows you to locate cracks, voids, rot and other areas of inhomgenity in the material under test. Complete System includes transducers, instrumentation unit, cables and software for PC, Conforms to ASTM C - 597 and other standards.

Gecor 8™:The Gecor 8™ features:

1. A method for rapidly mapping a structure's rebar corrosion rate with an advanced modulation confinement technique for precise corrosion rate analysis.

2. A new corrosion rate analysis technique for use in very wet or submerged structures.

3. New methodology for measurement of cathodic protection efficiency and more

Chlorimeter™:Field Test System to Determine the Chloride Ion Concentration in Wet Or Dry Concrete, and other construction materials. This parameter is fundamental in corrosion analysis of existing structures. It automatically shows a temperature compensated reading of percent of chlorides on its digital display. A wide chloride ranges - from 0.002 to 2% chloride by weight - is covered. Results can be obtained in minutes!

Cor Map II™:Advanced system for corrosion potential data acquisition and analysis, allowing the user to quickly identify areas of probable corrosion in the field. Unique Electrode is designed for use in horizontal, vertical and inverted positions. Temperature and humidity sensors facilitate inclusion of envrionmental conditions in data analysis. Conforms to ASTM C-876.

Trident™:A Microwave Meter Used for the Rapid Determination of Moisture Content in Sand and Other Fine or Coarse Aggregates. It is fast and easy to use as well as completely portable.

Aquaprobe™:Meter for the Rapid Determination of Moisture Content in Different Types of Soil.

Cementometer™:A Microwave Meter Used for The Determination of Water/Cement Content Ratio in Fresh Concrete. (Type R for Regular Water Cement Ranges. Type L for Low Water Cement Ranges.)

Aquameter™:Used for The Measurement of Moisture Content in Solid Materials. Includes Meter, Test Cable and Case.

Nestor Chonillo, Vice President, Angelica Larios, Marketing and Inside Sales, Nelson Flores, Inside Sales, and Michael W. Hoag, President staffed the James Instruments Inc. booth at World of Concrete 2011.

Nestor Chonillo, Vice President, Angelica Larios, Marketing and Inside Sales, Nelson Flores, Inside Sales, and Michael W. Hoag, President staffed the James Instruments Inc. booth at World of Concrete 2011.

James Instruments Inc. had a staff of four to great customers and meet with the industry. Michael W. Hoag, President, Nestor Chonillo, International Sales, Angelica Larios, marketing and inside Sales, and Nelson Flores inside sales were on hand to answer customers questions. “This show represents a significant opportunity for us and our staff to meet our customers, learn from them and demonstrate the equipment we have for solving their problems” says Michael W. Hoag, President of James Instruments Inc., he continues “We at James Instruments feel it is important to talk directly to our customers in order to meet and exceed their expectations in regards to what the cutting edge Non Destructive Testing technology that our company manufactures can do.”

World of Concrete/World of Masonry 2011 Show Floor

World of Concrete/World of Masonry 2011 Show Floor

The World of Concrete/World of Masonry is the industries longest standing and largest show. This well-known industry show continued to build upon its reputation as the only annual

international commercial construction trade show for the concrete and masonry industry with

48,554 professional registrants in attendance. World of Concrete also showcased just over 1,200 indoor/outdoor exhibitors in more than a half-million square feet of exhibit space.

James Instruments specalises in Non-Destructive testing equipment for concrete and other construction materials. Central to the improvement of the concrete infrastructure are tools that evaluate the condition of existing construction. Destructive and non-destructive testing (NDT) techniques are applied. Destructive tests can provide direct information, but are relatively expensive, time-consuming and cause damage to the structure. Destructive test results often cannot be evaluated using statistical approaches because the number of locations in the structure that can be tested without damage to the structure is limited. On the other hand, NDT techniques are relatively inexpensive to apply, and they can detect, localize, and characterize flaws and damage in concrete structures without leaving any undesirable discontinuities or causing damage to concrete members.

James Instruments Inc. is the leading manufacturer of non-destructive test equipment for construction materials, specifically concrete, ceramic, wood and other coarse grained materials. We supply the instruments that measure and analyze strength, structure, corrosion and moisture in concrete and other construction materials. And more. James Instruments -- rugged, quality equipment for field use -- backed by factory service and an ongoing program of research and development.

For More information regarding this or other non destructive testing equipment for construction materials you can visit www.ndtjames.com or email [email protected] or [email protected].