meter for rapid determination of moisture content in wet cement and
The James Cementometer™ represents a
break-through in modern moisture measurement technology. By utilizing
the latest microwave and microprocessor science, the
Cementometer™ can determine the
moisture content of freshly mixed cement, concrete, and mortar. Simply
insert the prongs of the probe into the material to be measured and
instantaneously the water cement ratio is shown on the easy
to read display.
The Cementometer™ Microwave moisture
meter uses a two
to measure the complex dielectric constant of the
contact with the prongs. As the dielectric constant of
is four to eight times greater than most aggregates and
changes in water content directly
effect the sensor
average of five to ten readings is normally taken in order
ensure a valid reading. This output is then converted by the
content is displayed
Cementometer Type L™ handles low water/cement
ratio's with its five
prong probe. The range of this instrument is
approximately 0.2 - 0.4 water cements.
The units come
calibrated for standard type I, II, and III
It can also be programmed with up to ten different mix
design by the user.
For highest ac
user should program
the unit for
the material being used.
without the need for external computing devices.
Cementometer™ can store over 150 readings.
with the time and date for future reference. Data can
via USB interface to a personal computer running
the James Cementometer™ software.
Cementometer Type L™ for low water
0.2 - 0.4
x 16 Char. Trans - reflective
Downloadable Instruction Manual