|
|
|
|
|
|
|
|
|
|
|
The Windsor® Probe System: Non Destructive Test System for Concrete Compressive Strength in the field. Safe, Quick, and Simple to use it is the most effective method of Concrete Compressive Strength Testing on Site. The System performs equally well on standard and high performance concrete. Conforms to ASTM C-803 and other International Standards.
|
Measures the Bonding Strength between two layers of existing materials. Determine the adhesion strength of shotcrete, epoxies, paint, asphalt and other repair materials or coatings. Includes 10 - 2" Discs.
|
A unique instrument for measuring the strength of new or existing concrete, mortar and other construction materials in the field utilizing the established principle of resistance to penetration. A unique chuck allows testing of mortar joints compressive strength in the field. Conforms to ASTM C-803.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual Test Hammers provide the most economical, quick and easy concrete compressive strength test in the field. It will also provide an indices of hardness and compressive strength for other construction materials. Conforms to ASTM C-805 and other International Standards.
|
Low Impact Manual Test Hammers provide the most economical, quick and easy concrete compressive strength test in the field for concrete specimens below 100mm ( 4inch ) thickness, as well as rock core testing. It will also provide an indices of hardness and compressive strength for other construction materials, such as ceramics, and tile . Conforms to ASTM C 805, D-5873 and other International Standards.
|
Digital Test Hammers for the quick and easy determination of the strength of concrete, and hardness of construction materials. Digital functions allow greater number of test, leading to better quality tests. Conforms to ASTM C-805 and other International Standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital Test Hammers for the quick and easy determination of the strength of concrete, and hardness of construction materials. Digital functions allow greater number of test, leading to better quality tests. Conforms to ASTM C-805 and other International Standards.
|
Unit Measures exposed probe length and automatically calculates the average of three probes and the strength of the concrete. Readings can be stored for later retrieval via USB.
|
Choose from a case of 75 or a set of 3. Available in Gold for light weight low density concete and Silver for standard density and high performance concrete .
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Anchor Test System measures the pull strenght of anchors in concrete, wood, masonry, brick and other construction materials.
|
|
Measures the exposed probe length in both 0.050 of an and inch and 0.5 mm. For use with the Windsor Probe System.
|
|
|
|
|
|
|
|
|
|
|
|
|
It is recommended that calibration of the rebound hammers be checked regularly usually after about 2000 strokes.The James Calibration Anvil (W-C-7312) has been designed for just that purpose.
|
Super Anchor Test System for testing anchor strengths in concrete, wood, masonry, and other construction materials above 30 KN ( 4000 lbf ).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wrench 3/4", for use with Windsor Probe System
|
|
|
|
|
|
|
|
|
|
|
|
|
Mohs Kit for use with the Windsor Probe System
|
|
Test Area Cleaning Brush for Windsor Probe System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Actuating Template for the Windsor Probe Driver
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<-- -->
Individual parts for the Windsor pin System.
|
|
|
|
|
|
|
|
|
|
|
|
|
Pins are sold per piece or per case. Each case contains 40 pins. Get Discounts on bulk orders! See discount table:
# of CASES
| discount | 3-5 Cases
| 5% | 6-9 Cases | 10% | 10-11 Cases | 15% | 12 or more cases | 20% |
* The discount is automatically subtracted from your shopping cart.
|
Individual parts for the Windsor pin System.
|
Replacement Grinding Stone
|
|